Mint customized brushless waterproof winch servo (7.4V 28.0 kgf.cm, 0.36s/360°)

Drum included

Mint customized brushless waterproof rudder servo (7.4V 10.0 kgf.cm, 0.04s/60°).

The Red Ant RA-3 (Stinger IOM Winch) is a brushless, high-voltage sail winch custom-designed and programmed for competitive International One Metre (IOM) RC sailboats. It features an intelligent two-speed firmware (moving slowly with gentle stick inputs for fine trim and rapidly at full-speed when needed) and is a direct-mount replacement for RMG winches.

Great battery for the DF95.

10C discharge provides plenty of power on demand while increasing battery life versus 25C versions.

Battery Specification: 

• Capacity: 850mAh
• Cell Count: 2s
• Voltage: 6.6V
• Constant Discharge: 10C
• Peak Discharge: 20C
• Maximum Charge Rate: 3C
• Battery Size: 55 x 30 x 16mm  
• Battery Weight: 47g
• Charge Plug: JST-XHR
• Discharge Plug: JR

Lipo battery for the Mint, IOMs, EC12s, Soling 1M, Star 45, etc 

Key Features:

• Superior Discharge rate
• Low Internal Resistance (IR)
• Outstanding Cycle Performance
• Delivers full capacity and discharge
• Ideal for Scale Fixed Wing and RC Helicopters

Pack Specification:

• Capacity: 1300mAh
• Cell Count: 2s
• Voltage: 7.4V
• Constant Discharge: 45C
• Peak Discharge: 90C
• Maximum Charge Rate: 5C
• Battery Size: 75 x 34 x 14mm
• Battery Weight: 77g
• Charge Plug: JST-XHR
• Discharge Plug: XT60

Optimized for Lipo Charging: Charges 1s-6s LiPo/LiFe/LiIon/LiHV batteries, with 300W (5-27V, 0.2-15A) in DC and 80W (12-20V, 5A) in PD mode, perfect for RC cars and drones. Additional chemistry - NiMH/NiCd: 2-15cells and Pb: 3S/6S/12S

Advanced Balancing and Safety: Features an active balancer to maximize Lipo battery life and performance, combined with essential safety features like short-circuit and over-temperature protection.

Versatile Connectivity: Equipped with an XT60 interface (DC: 7-28.0V) and a Type-C PD input (PD3.0/QC: 12-20V), it is a perfect field charger to use with various Lipo battery types used in RC cars, trucks, drones, planes and boats.

Specifications

• Size: 70.6x50.6x46mm
• Weight: 150g
• Display Type: TN, 1.77 inch, 128x160 Pixel Resolution
• Battery Types/Cells: LiPo/LiFe/LiIon/LiHV (1-6cells), NiMH/NiCd (1-15cells), Pb (3S/6S)
• AC Input Voltage: 100V～240V 50/60Hz
• DC Input Voltage: 10-30.0V
• Charger Power: DC – 300W,
• Charge Current: 0.2-10.0A
• Discharge Power: 19W based on 6S (4.2V/S)
• Discharge Current: 0.1-2.0A
• Balance Current: LiPo/LiFe/LiIon/LiHV - Max. 500mA

This can be used with the B6neo Charger to charge DF95/DF65 LiFe Batteries.

Also, can be used to charge NiMH 5 cell batteries for RC Lasers, EC12's, Star 45's, etc. 

Most newer chargers have XT60 outputs. This toggle goes from XT60 to charge a transmitter battery pack (Futuba). One end is XT60 FEMALE, other end is SERVO/ESC MALE.

• Flysky FS-i6X is default 6CH with FS-iA6B Receiver. If you have 10 channels receiver FS-iA10B, that you can open to 10 channels.
• Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support
• Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life.

Fast Charging USB C Charger Block and Cord (47 in) 

Perfect to compliment the SKYRC B6 Neo2 300W DC Smart Charger. 

Lipo battey safe fire and explosion proof safety bag, made of flame retardant glass fiber.

Sized to fit BBMY IOM Battery Travel Box

The surface is coated with fire retardant coating.

The safety bag is to protect the battery charging, transportation and storage.

Mint Power Switch